|
The CAPRA-70LS is a ruggedly constructed continuous motion
bottom overlap horizontal shrink wrapping system that offers
years of reliable operation. This unique form, fill and seal
packaging system uses a bottom lap seal via a fixed plow
that leaves no excess film to waste. Suited for long
production runs, these machines are capable of shrink
wrapping up to 70 products per minute.
FEATURES:
15 Foot long Lugged In-Feed Conveyor.
Thermal lap seal with vacuum bottom conveyor.
Vertical or horizontal hot knife seal bar.
Runs both Polyolefin and Polyethylene films.
Printed film registration.
Manufactured in 2003 and used only 6 months.
VOLTAGE: This system requires 480 Volt AC / 3
Phase.
AIR PRESSURE: 80 P.S.I.
|
