- Manual shuttle with dual pushbutton
seal cycle controls.
- ROTO-CHAMBER seal cylinder provides
maximum seal pressure.
- Emergency STOP push-buttons located
at front and rear of
- Side mounted drop down Stainless
- Adjustable leveling feet.
- Currently set up for single station
SEAL PLATTEN DIMENSIONS: 15” long x 18” wide.
VOLTAGE REQUIRED: 220 Volt AC / Single Phase / 15 Amp.
AIR PRESSURE REQUIRED: 80 to 100 P.S.I. AIR
CONSUMPTION: 2.5 S.C.F.M.
MAXIMUM PART CLEARENCE HEIGHT: Adjustable up to 7” high.
6 ft. long
x 2.5 ft. wide x 6